Everbuild Roll & Stroll Contract Carpet Protector Film – Bulk Buy

Everbuild Roll & Stroll Contract Carpet Protector Film

SUBSTRATE PREPARATION

APPLICATION METHOD / TOOLS

Remove outer packaging from roll. Place roll on the floor facing the direction it is to be applied and unwind approx 12 inches (300mm) of material. Ensure the roll is stuck by smoothing out by either hand or foot. Simply push roll forward using hands or feet ensuring roll goes in a straight line. Smooth out with

Everbuild Roll & Stroll Contract Carpet Protector LIMITATIONS

• This product is for application to carpets, DO NOT use on hard surfaces. Use Roll and Stroll Hard Surface Protector.
• Adhesion will be reduced on dusty surfaces. Vacuuming or mopping prior to use is recommended.
• EVERBUILD ROLL & STROLL Contract Carpet must be removed after a maximum of 4 weeks to prevent a sticky residue being left.
• Always check EVERBUILD ROLL & STROLL Contract Carpet is stuck firmly to surfaces before commencing work.
• Not suitable for pure wool carpet
• On some surfaces EVERBUILD ROLL & STROLL Contract Carpet may leave a residue, this can be easily removed using Everbuild Wonder Wipes or warm soap and water. A test area is always recommended prior to full application. Always check compatibility of cleaning agent with sub floor prior to full application.
• *In heavily trafficked areas or where air temperature exceeds 22°C, remove after 1 week maximum. Do not use underfloor heating whilst product is in situ.
• Do not use on surfaces which bleed oils or plasticizers.
• Product may become slippery when wet. Mop up any spills immediately or replace where necessary.
• It is the users responsibility to determine suitability for use. If in doubt contact technical services for advice.