Free Shipping on Everbuild, Sika and Feb Products on orders over £600+VAT
, ,

Everbuild Roll & Stroll Premium Carpet Protector – Bulk Buy


Everbuild Roll & Stroll Premium Carpet Protector

The ultimate self adhesive floor protection for carpets

EVERBUILD ROLL & STROLL Premium Carpet Protector is the ultimate self adhesive carpet protector, ideal for protecting against mess, dirt, staining, spillages and soiling that occurs during painting, plastering, building, tiling, general maintenance and repair work. It is ideal for protecting stair carpets and can be used for commercial and domestic applications. Totally waterproof, it protects against expensive-to-clean paint spillages on carpets. Due to the adhesive face being reverse wound, EVERBUILD ROLL & STROLL Premium Carpet Protector easily unwinds with minimum effort and no need to bend down

  • Easy roll out with no specialist applicator equipment required.
  • Will not creep and wrinkle after application. Stays where it is put!
  • Totally waterproof.
  • Protects against expensive-to-clean spillages from paints, varnishes etc.
  • Easily removed, will not leave a sticky residue.
  • Can be left for up to 4 weeks *.
  • Adheres to most common carpet types.
  • Safer than dust sheets, no trip risk.
  • Unit size: 600mm x 25m roll ; 600mm x 75m

Usage

  • All carpeted areas – flat or stairways
  • For use across all sectors to protect carpets from costly damage

Approvals / Standards : Reaction to fire EN13501-1 Classification: BFL-s1

£31.73£77.92 +VAT

£31.73 +VAT
£77.92 +VAT
£ 29.47

Everbuild Roll & Stroll Premium Carpet Protector extended information

Adhesive: Pressure sensitive acrylic

Slip characteristics: 0.45 – 0.60 CoF

Everbuild Roll & Stroll Premium Carpet Protector product information

Packaging600mm x 25mtr roll
600mm x 75mtr roll
Shelf Life36 months from date of manufacture.
Storage ConditionsStore in cool dry conditions between 5 and 25°C. Safe in normal use however as a precaution keep polythene outer packaging away from children.
Thickness100 μm

Application Instructions

Substrates Preparation

Ensure surfaces to which EVERBUILD ROLL & STROLL Premium Carpet Protector is to be applied are clean sound, dust free and dry.

Application Method / Tools

Remove outer packaging from roll. Place roll on the floor facing the direction it is to be applied and unwind approx 12 inches (300mm) of material. Ensure the roll is stuck by smoothing out by either hand or foot. Simply push roll forward using hands or feet ensuring roll goes in a straight line. Smooth out with hands or feet as it unwinds. A very effective way of laying EVERBUILD ROLL & STROLL Premium Carpet Protector is to push the roll along with a soft broom/brush using the brush to smooth out and remove air bubbles as it unwinds.

Limitations
  • This product is for application to carpets, DO NOT use on hard surfaces. Use Roll & Stroll Hard Surface Protector.
  • Obviously, adhesion will be reduced on dusty surfaces. Vacuuming prior to use is recommended.
  • EVERBUILD ROLL & STROLL Premium Carpet Protector must be removed after a maximum of 4 weeks to prevent a sticky residue being left.
  • Always check the product is stuck firmly to carpets before commencing work.
  • On some surfaces EVERBUILD ROLL & STROLL Premium Carpet Protector may leave a residue, this can be easily removed using warm soapy water or carpet cleaning solution. A test area is always recommended prior to full application.
  • In heavily trafficked areas or where air temperature exceeds 22°C, remove after 1 week maximum. Do not use underfloor heating whilst product is in situ.
  • Product may become slippery when wet. Mop up any spills immediately or replace EVERBUILD ROLL & STROLL Premium Carpet Protector where necessary.
  • It is the users responsibility to determine suitability for use. If in doubt contact technical services for advice.
Brands

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Everbuild Roll & Stroll Premium Carpet Protector – Bulk Buy”

There are no reviews yet.