Feb Febmix Plus – Mortar Plasticiser – Bulk Buy

Feb Febmix Plus extended information

Uses

• Designed to be used as a mortar plasticising admixture in brick and block laying mortars
• ‘Micro’ air entraining properties reduce water demand and greatly reduce the likelihood of cracking and crazing
• Provides enhanced resistance to frost attack in both wet and hardened mortar state

Feb Febmix Plus Characteristics & Advantages

• Ultra-stable bubble structure.
• Uniform air-entrainment structure.
• Works with most types of Portland Cement and difficult sands.
• Increased resistance to damage by freeze/thaw.
• Reduced segregation and bleed.
• Non corrosive to embedded metals.
• Increased working time.
• Easier and faster mortar spread.
• Can be used with P.F.A. containing mortars

Approvals & Standards

Feb Febmix Plus conforms to EN 934 Part 3(2009) specification for air-entraining (plasticising) mortar admixtures.

Feb Febmix Plus product information

Application Instructions

MIXING

In all cases, add to mix or to gauging water at an addition rate of 125ml to 250ml per 50kg cement, depending on the degree of plasticizing/entrainment required.

Note: remember to reduce required quantity of water accordingly. One litre of Feb Febmix Plus added to a 200ltr drum of gauging water will be sufficient for gauging approx. 4 x 50 kg cement for mortar or render mixes.

FEB FEBMIX PLUS APPLICATION METHOD / TOOLS

Feb Febmix Plus may be either pre-mixed with the water or added directly into the mix at the same time as the water. NB: the superior plasticising qualities of Feb Febmix Plus will result in a significant reduction in water demands of any given mix.
Feb Febmix Plus can be used with other admixtures provided these are added separately to the mix. It can be used for all types of Portland Cement, including sulphate-resisting. It can also be used in sand mortars as a further precaution against frost.